Table of Contents
Advertisement
To install the PCI expansion board:
Remove the screw near the slot cover on the PCI cage.
1.
Figure 54 Removing the Screw on the PCI Cage on the Full-height / Full-length Side
Figure 55 Removing the Screw on the PCI Cage on the Low-profile Side
Remove the slot cover from the PCI cage.
2.
Slide the expansion board into the slot, aligning the board with its matching connector.
3.
Firmly press the board to seat it properly on the slot.
Tighten the screw that secures the expansion board to the PCI cage.
4.
Removal and replacement procedures 84
Advertisement
Table of Contents
