Semi-Annually; Changing The Engine Oil - Fayat Dynapac DR7X Operating Instruction

8.8 Semi-annually

8.8.1 Changing the engine oil

Fig. 58
Fig. 59
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at oper-
ating temperature.
– Use only oil of the permitted specification
Ä Chapter 8.2.1 „Engine oil" on page 63.
– Filling quantity:
lubricants" on page 65
Protective equipment:
1. Park the machine in secured condition
„Parking the machine in secured condition" on page 53.
2. Park the machine so that the tamper foot is in horizontal posi-
tion.
3.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Clean the area around oil dipstick (1) and drain plug (3).
4. Unscrew the oil dipstick.
5. Unscrew the drain plug and collect any oil running out.
6. Clean the oil drain plug and screw it back in with a new seal
ring (2).
7. Fill in fresh oil up to the bottom edge of the filler bore.
8. Push the oil dipstick (1) back in.
9. Check for leaks after a short test run.
10. Check the oil level on the dipstick, correct if necessary.
11. Dispose of oil in an environmentally friendly way.
DR7X
Maintenance – Semi-annually
Ä Chapter 8.3 „List of fuels and
n Working clothes
n Protective gloves
Ä Chapter 6.4
73