Parking The Machine In Secured Condition - Fayat Dynapac DR7X Operating Instruction

6.4 Parking the machine in secured condition

Fig. 35
Fig. 36
Fig. 37
Operation – Parking the machine in secured condition
1. Set the throttle lever to position "MIN" (idle speed).
NOTICE!
Danger of engine damage!
–
2. Set the engine stop switch to position "OFF".
ð The engine is shut down.
3. Park the machine so that it cannot turn over.
4. Pull the rope by the starter handle, until resistance can be
felt. Guide the starter handle back to initial position.
ð This procedure protects against moisture deposits inside
the engine.
DR7X
Do not shut down the engine all of a sudden
from full load speed, but let it idle for about two
minutes.
53