Replacing The Fuel Filter - Fayat Dynapac DR7X Operating Instruction

Maintenance – Annually
Fig. 78

8.9.3 Replacing the fuel filter

Preparations
80
Protective equipment:
Special tool:
1. Park the machine in secured condition
„Parking the machine in secured condition" on page 53.
2. Allow the engine to cool down for at least 15 minutes.
3. Pull off the spark plug connector (1).
4. Clean the area around the spark plug.
5. Unscrew the spark plug with a 16 mm spark plug spanner
(2).
6. Check the electrode gap of the new spark plug with a feeler
gauge, if necessary, adjust the gap.
ð Nominal value: 0.6 - 0.7 mm (0.024 - 0.028 in)
7. Carefully screw in the spark plug by hand.
8. Once the sealing surface of the new spark plug is in contact,
tighten for another 1/2 turn with the spark plug spanner.
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
Protective equipment:
1. Park the machine safely
in secured condition" on page 53.
DR7X
n Working clothes
n Protective gloves
n 16 mm spark plug spanner
Ä Chapter 6.4
Working clothes
n
n Safety shoes
n Protective gloves
Ä Chapter 6.4 „Parking the machine