Table of Contents
Advertisement
2. Getting Started
2.1
Baby Unit Power Supply
DC JACK
DC PLUG
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to the electrical outlet.
NOTE
Only use the supplied power adapter (5V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position.
The power LED will light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Battery Installation
1. Insert the wire tabs of the rechargeable battery pack into the contact slots
as shown above and fit the battery pack into the compartment.
Getting Started
DC Jack
Black
Red
DC Plug
Small cross head or flat
end screwdriver
9
Advertisement
Table of Contents
