fantastic furniture Clara Chair 1 Str Beige Manual page 6

Step 3
4 x Self-Tapping Screws
(H3)
Attach seat(P5) to seat frame(P2,P3,P4) with 4 x self-tapping screws (H3)
using phillips head screwdriver.Carefully position seat as shown. There should be an
approximate 5cm gap between the front seat edge and seat frame as shown.
Note:there are no pre-drilled holes in the seat.
Step 4
1 x Allen Key
(H4)
Apply downward pressure on the seat pad to ensure chair is level whilst tightening bolts.
Tighten firmly with allen key(H4)
This distance approx 5cm
Phillips
Head Screwdriver
Front of Seat
(P5)
(P2,P3,P4)
Back of Seat
Page 6