Download
Share
Print this page
fantastic furniture CODA INSERT 2 DRAWER Manual
  1. Manuals
  2. Brands
  3. fantastic furniture Manuals
  4. Indoor Furnishing
  5. CODA INSERT 2 DRAWER
  6. Manual

fantastic furniture CODA INSERT 2 DRAWER Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Version 1.0
CODA
INSERT 2 DRAWER
www.fantasticfurniture.com.au

Advertisement

loading

Related Manuals for fantastic furniture CODA INSERT 2 DRAWER

Summary of Contents for fantastic furniture CODA INSERT 2 DRAWER

  • Page 1 Version 1.0 CODA INSERT 2 DRAWER www.fantasticfurniture.com.au...
  • Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...

  • Page 3: Assembly Checklist

    Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.

  • Page 4: What You Need

    What you need to assemble the product Right Side Panel (P2) Back Panel (P4) DO NOT USE Additional Tools Required Flat head screwdriver; Phillips head screwdriver; Left Side Panel (P1) Rail (P3) Right Parts list Drawer Back Drawer Side Box 1: Left Side Panel (P1); (P9) (P7) Right Side Panel (P2);...
  • Page 5 Step 1 You will need 2 x CL Runner 2 x CR Runner Tracks (H6) Tracks (H7) (P2) 8 x Small Phillips head Screws (H5) screwdriver (P1) Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P1) with 4 x Small Screws (H5). Attach 2 x CR Runner Tracks (H7) to Right Side Panel (P2) with 4 x Small Screws (H5).
  • Page 6 Step 3 You will need 2 x Dowels 4 x Long (P2) (H1) Screws (H2) (P4) Phillips head screwdriver (P3) Insert 2 x Dowels (H1) into the holes of Back Panel (P4) as shown. Attach Right Side Panel (P2) to Back Panel (P4) and Rail (P3) with 4 x Long Screws (H2). Tighten the screws with a Phillips head screwdriver.
  • Page 7 This is how a cam nut works ..Step 5 (P10) The head of the cam bolt goes into the open (P6) mouth of the cam nut. You then turn the cam You will need nut so it tightens over the bolt.
  • Page 8 Step 8 (P7) You will need 1 x DL Runner 1 x DR Runner (H8) (H9) 4 x Small Phillips head Screws (H5) screwdriver (P6) Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P6) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P7) with 4 x Small Screws (H5).
  • Page 9 Step 10 You will need 2 x Medium 2 x Covers Screws (H10) (H11) Phillips head screwdriver Take down the drawers from the insert cabinet carefully. Attach the cabinet to the bookcase with 2 x Medium Screws (H10) using a Phillips head screwdriver. If you'd like to adjust the insert cabinet or remove it, please seal the holes with the Covers (H11).

  • Page 10: Job Complete

    cabinet as shown Put the drawers into the Recommended weight capacity: 5KG. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 10...