Advertisement
Step 7
You will need
2 x Large
Phillips head
Cam Nuts (H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert large cam nuts (H2) into the top panel rail (P4) and the front rail (P5). Rotate the cam
nuts (H2) so the arrow is pointing towards the incoming cam bolt (H1).
To fix the top panel rail (P4) and front rail (P5) to the right side panel (P3), use the phillips
head screwdriver to tighten the cam nuts (H2).
Step 8
You will need
4 x Large
Phillips head
Cam Nuts (H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert large cam nuts (H2) into the top panel rail (P4) ,
front rail (P5) and back support rail (P6, P7). Rotate the
cam nuts (H2) so the arrow is pointing towards the
incoming cam bolt (H1).
To fix the top panel rail (P4) , front rail (P5) and back
support rail (P6, P7) to the left side panel (P2), use the
phillips head screwdriver to tighten the cam nuts (H2).
www.fantasticfurniture.com.au
(P6)
(P7)
PAGE 8
Advertisement
