Advertisement
Step 11
You will need
6 x Large
Phillips head
Cam Nuts (H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert large cam nuts (H2) into the left side panel (P2)
and right side panel (P3). Rotate the cam nuts (H2) so
the arrow is pointing towards the incoming cam bolt (H1).
To fix the left side panel (P2) and right side panel (P3) to
the top panel (P1), use the phillips head screwdriver to
tighten the cam nuts (H2).
Step 12
You will need
2 x Wood
Phillips head
Screws (H4)
screwdriver
Fix the top panel rail (P4) to the top panel (P1)
with 2 x wood screws (H4) by tightening with a
phillips head screwdriver.
www.fantasticfurniture.com.au
PAGE 10
Advertisement
