Maintenance; General Cleaning; Replacement Of The Light Bulbs - Lamona HJA2540 User Instructions

90cm chimney extractor
Table of Contents

Advertisement

MAINTENANCE

IMPORTANT: Before cleaning or attempting any type of maintenance, always make sure that the
electric supply is disconnected.
To avoid the possibility of fire, adhere strictly to all of the recommendations included in this booklet,
paying particular attention to the grease filters to ensure grease deposits do not build up.
NOTE: The manufacturer declines all liability in cases where the instructions for the appropriate
installation, maintenance and use of the extractor hood are not observed.
If the power supply is cut or damaged in any way, disconnect the extractor from the electricity supply and
call the service number on the rear cover of this booklet.

GENERAL CLEANING

Wipe the external surfaces of the appliance regularly using warm water and a mild detergent. NEVER use
abrasive cleaners.
REPLACING THE LIGHT BULBS
Ensure that the power is switched off and the bulbs are cool.
Remove the grease filters to gain access to the bulbs.
Unscrew to remove the lamp and replace it with a new lamp of the same type and wattage.
NOTE: LAMP REPLACEMENT IS NOT COVERED BY YOUR GUARANTEE
Page 11
www.howdens.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents