Decorative Chimney Fitting - Lamona HJA2540 User Instructions

DECORATIVE CHIMNEY FITTING

• Connect the extractor to the electricity supply (see electrical connections page).
• Secure the lower chimney bracket to the wall using the screws provided.
• Slide the upper chimney section inside the lower chimney section and fit into recess on the top of
the hood; ensuring that the two return flanges on the top of the lower section fit into the recesses
provided on the lower chimney bracket.
• Secure the upper chimney bracket to the wall vertically above the lower fixing bracket, adjacent to
the ceiling.
• Extend the upper chimney section to the ceiling and secure to the upper chimney bracket with the
screws provided.
• Fit the grease filters to the hood.
DO NOT: attempt to operate the extractor without the grease filters in position.
Fig 5.
www.howdens.com
Fig 6.
Page 8