Table of Contents
Advertisement
PRODUCT INFORMATION
Keep this book in a handy place for reference; it contains important details on the safe and proper
use of your appliance. Should you sell the extractor please remember to pass the instruction book
on to the new owner.
The extractor is designed to give you the option to extract air by ducting to the outside and away (via
an exterior wall), or to re-circulate through charcoal filters to minimise odours, steam and condensation.
The choice is yours to decide at installation, and both systems are explained in the booklet. We recommend
that you read this booklet thoroughly before attempting to install or operate the extractor.
The light on this appliance should only be used during operation of the cooker hood. It should not be left
on permanently and used as a lighting source.
PARTS IDENTIFICATION
On opening your box you will find the extractor hood, a two-piece telescopic decorative chimney and a
bag of wall fixings and screws, two wall fixing brackets, a ducting connector, recirculation deflector and a
wall fixing template drawing.
PARTS LIST
1)
Telescopic Chimney Upper
2)
Telescopic Chimney Lower
3)
Upper Chimney Bracket
4)
Lower Chimney Bracket
5)
Ducting Connector
6)
Recurculation Deflector
7)
Extractor Hood
DATA
Power Supply:
230/240v ~ 50Hz
Rating:
220 W
Fuse Rating:
3 A
2x bulbs
S.E.S. Lamps 40 W each
www.howdens.com
1
2
Page 4
3
4
5
6
7
Hide quick links:
Advertisement
Table of Contents
