Related Manuals for International Concepts CU-125
Summary of Contents for International Concepts CU-125
- Page 1 ASSEMBLY INSTRUCTIONS Description : SMALL JELLY CUPBOARD RTA Item No. : CU-125 ITEM NO. : CU-125 Printed in Vietnam REVISED APR 13, 2016...
-
Page 2: Before Assembly
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your product. Protect the surface of the product with cloth if you are using any product with rubber feet or base. ASSEMBLY TOOLS REQUIRED NOT INCLUDED ITEM NO. : CU-125 Printed in Vietnam REVISED APR 13, 2016... -
Page 3: Part List
(M3.5 x 15mm) (M3.5 x 15mm) Knob Long screw (ɸ30 x 30mm) (M4 x 30mm) Long pan head screw Steel band (M4 x 25mm) Allen key (M4 x 30mm x 120mm) ITEM NO. : CU-125 Printed in Vietnam REVISED APR 13, 2016... - Page 4 Insert rail (G) into side panels (C) and (D) as shown below. Then attach bottom shelf (E) to right side panel (C) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (11). ITEM NO. : CU-125 Printed in Vietnam...
- Page 5 Slide back panel (H) into grooves of crown (A), and side panels (C) and (D). Then attach back panel (H) to the unit with pan head screws (5) as shown below. Tighten with a screwdriver. ITEM NO. : CU-125 Printed in Vietnam...
- Page 6 Attach steel band (10) to the unit with screws (6) and attach steel band (10) to the wall with screw (7) as shown below (to secure the product and prevent tipping). Tighten with a screwdriver. ITEM NO. : CU-125 Printed in Vietnam...
Need help?
Do you have a question about the CU-125 and is the answer not in the manual?
Questions and answers