Pole Mount Installation - Watchguard AP430CR Hardware Manual

WatchGuard AP430CR Hardware Guide

Pole Mount Installation

Use the supplied pole-mounting accessories to install the access point on a pole.
1. Attach the wall mount bracket to the access point with the included screws.
2. Attach the pole mount bracket to the wall mount bracket and access point with the included screws.
3. Place the access point on the pole.
4. Insert the clamps in the slots on the pole mount bracket and wrap around the pole.
5. Fasten the screws and make sure the access point is firmly attached to the pole.
13 WatchGuard Technologies, Inc.