Advertisement
Step 17
You will need
2 x Wall
2 x 16mm
Straps (H14)
Screws (H10)
2 x Washers
Phillips Head
(H9)
Screwdriver
We strongly advise that
you use the wall safety
strap provided to prevent
the unit toppling over.
Attach wall fixing strap to panel (P1) with 2 x 16mm screws (H10) and 2 x washers (H9) using
a phillips head screwdriver. There are pre-drilled holes on the bottom of panel (P1) to insert
the screws.
Move the chest to the final position.
Attach the safety strap to the wall. Make sure it is firmly attached and make sure it is a
snug fit.
The screws and wall plug are not provided. Please use appropriate fixtures
for your wall.
Seek advice from a qualified trades person on how to attach these wall
straps to your specific wall.
In the interest of our environment please dispose of all packaging
fantasticfurniture.com.au
P1
H9
H14
H10
Job Complete!
thoughtfully.
H14
Pre-Drilled
Hole
P1
H14
Page 14
Advertisement
