Advertisement
Step 2
You will need
12 x Wood Dowels
12 x Cam Nuts
(H3)
(H2)
8 x Cam Bolts
Phillips Head
(H1)
Screwdriver
Soft Headed
Mallet
Insert 12 x cam nuts (H2) into panels (P8), (P9), (P11) & (P12). Rotate the cam nuts so the
arrows point towards the incoming bolt.
Insert 12 x dowels (H3) into panels (P8), (P9), (P11) & (P2) by hand or gently using a soft
head mallet.
Screw 8 x cam bolts (H1) into panels (P13) using a phillips head screwdriver.
Step 3
You will need
16 x 38mm
4 x 22 Screws
Screws (H4)
(H6)
4 x Rhinestone
Phillips Head
Handles (H7)
Screwdriver
Begin assembling the drawers:
To attach panels (P11 & P12) to panel (P10), insert 4 x 38mm screws (H4) and tighten with a phillips head
screwdriver.
Slide in the drawer bottom panel (P14) into the grooves of panels (P11, P12 & P10) with the laminated side
facing up.
Attach the panel (P13) to panel (P11 & P12) and ensure the drawer bottom panel (P14) slides into the groove on
panel (P13).
Turn the cam nuts on panels (P11 & P12) clockwise with a phillips head screwdriver to lock in
position.
Attach the handle (H7) to panel (P13) with 1 x 22mm screw (H6) using a phillips head screwdriver.
Repeat this process for the remaining drawers.
fantasticfurniture.com.au
H1
x 4
pcs
P13
x 4
pcs
H2
H3
H1
Repeat x 4
P12
H4
P10
H2
H1
Unlock
P11
x 4
pcs
H2
P12
H3
H1
P8
H2
P9
H3
This is how a cam nut works........
Laminated
Side
P11
H4
P12
H2
P10
Lock
H2
H3
H2
H3
H3
The head of the cam bolt
goes into the open mouth of
the cam nut. You then turn
the cam nut so it tightens
over the bolt.
P13
H6
P14
P11
Laminated
H2
H2
H3
H7
Side
Page 6
Advertisement
