Advertisement
Step 6
You will need
Phillips Head
Screwdriver
Attach panels (P7), (P8) to panel (P2) by aligning the dowels & cam bolts with the
corresponding holes.
Turn the cam nut on panels (P7), (P8) clockwise motion with a phillips head screwdriver to
lock in position.
Step 7
You will need
Phillips Head
Screwdriver
Attach panel (P9) to panel (P2) by aligning the dowels & cam bolts with the corresponding
holes.
Turn the cam nut on panel (P9) clockwise motion with a phillips head screwdriver to lock in
position.
fantasticfurniture.com.au
P2
P9
This is how a cam nut works........
P7
P8
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Page 8
Advertisement
