Advertisement
Step 10
Warning Label
at the back
and top of unit
Slide panels (P15) & (P16) into the grooves in panels (P2), (P3) & (P4) with the
laminated side facing the front for panel (P15).
Step 11
You will need
Phillips Head
Screwdriver
This is how a cam nut works........
Attach panel (P1) to panels (P2), (P3) & (P4) by aligning the dowels and cam bolts to the
holes.
Ensure the back panels (P16) & (P15) slide in the groove of panel (P1).
Turn the cam nuts on panels (P2), (P3) & (P4) clockwise with a phillips head
screwdriver to lock in position.
fantasticfurniture.com.au
P15
P16
P4
P2
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Laminated Side
P3
Front
P1
P4
P2
P3
Page 10
Advertisement
