Clock Functions - AEG BEB351110B User Manual

10 www.aeg.com
6. Turn the knob for the heating
functions to the off position, press
Plus Steam
The indicator turns off.
7. Remove water from the cavity
embossment.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
7.2 Setting the time. Changing
the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Press
starts to flash.
3. Press
time.
to turn off the oven.
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MIND-
ER at any time, also when the appliance is off.
or to set the correct
starts to flash.
again and again until
or to set the DURATION
WARNING!
Make sure that the oven
is cold before you
remove the remaining
water from the cavity
embossment.
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the time.
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
.
flashes and
.
flashes and