Additional Functions; Clock Functions - AEG BES355010M User Manual

2. Fill the cavity embossment with tap water.
The maximum capacity of the cavity
embossment is 250 ml. Do not refill the
cavity embossment during cooking or
when the appliance is hot.
3. Set the function:
4. Press: Plus Steam
It works only with the function: True Fan
Cooking PLUS. The indicator turns on.

7. ADDITIONAL FUNCTIONS

7.1 Cooling fan
When the appliance operates, the cooling fan
turns on automatically to keep the surfaces of

8. CLOCK FUNCTIONS

8.1 Clock functions table
Time of Day
To set, change or check the time of day.
Duration
To set how long the appliance works.
Minute Minder
To set a countdown. This function has no ef‐
fect on the operation of the appliance. You
can set this function at any time, also when
the appliance is off.
8.2 Setting: Time of Day
1. - press repeatedly to change the time
of day. - flashes.
2. , - press to set the time.
After approximately 5 sec, the flashing stops
and the display shows the time.
- flashes when you connect the appliance
to the electrical supply, when there was a
.
.
5. Turn the control knob to set temperature.
6. Preheat the empty appliance for 10 min to
create humidity.
7. Place the food inside the appliance. Do
not open the oven door during cooking.
8. Turn the knob for the heating functions to
the off position to turn off the appliance.
9. Press Plus Steam
The indicator turns off.
10. After the function ends, carefully open the
door. Released humidity can cause
burns.
11. Make sure that the appliance is cold.
Remove the remaining water from the
cavity embossment.
the appliance cool. If you turn off the
appliance, the cooling fan can continue to
operate until the appliance cools down.
power cut or when the timer is not set.
- press to set the time.
8.3 Setting: Duration
1. Set a heating function and the
temperature.
2. - press repeatedly.
3. , - press to set the: Duration.
The display shows
the set time ends. The signal sounds and the
appliance turns off.
4. Press any button to stop the signal.
5. Turn the knobs to the off position.
8.4 Setting: Minute Minder
1. - press repeatedly.
2. , - press to set the time.
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
3. Press any button to stop the signal.
4. Turn the knobs to the off position.
.
,
- flashes.
. - flashes when
- flashes.
ENGLISH 9