TYAN S7120 Manual page 102

Configure sSATA as
Indentify the SATA port is connected to Solid State Drive or Hard Disk Drive
AHCI / RAID
sSATA test mode
Enable/Disable sSATA test mode
Disabled / Enabled
sSATA Mode options
sSATA mode related options
Support Aggressive Link Power Management
Enables/Disables SALP
Disabled / Enabled
sSATA Port 0/1/2/3/4/5
Enable or Disable SATA Port
Disabled / Enabled
Hot Plug
Designates this port as Hot Pluggable
Disabled / Enabled
Configure as eSATA
Configures port as External SATA (eSATA)
Disabled / Enabled
Spin Up Device
If enabled for any of ports Staggerred Spin Up will be performed and only the drives
witch have this option enabled will spin up at boot. Otherwise all drives spin up at
boot.
Disabled / Enabled
sSATA Device Type
Indentify the SATA port is connected to Solid State Drive or Hard Disk Drive
Hard Disk Drive / Solid State Drive
sSATA Topology
Identify the Secondary SATA Topology if it is Default or ISATA or Flex or
DirectConnect or M2
Unknown / ISATA / Direct Connect / Flex / M2
3.3.12.5 USB Configuration Submenu
102
http://www.tyan.com