aventon Pace 350 User Manual page 26

Tire Information
PACE 350/500 uses 27.5'' x 2.2'' rubber tires with inner tubes. The tires are designed for durability and
safety for regular cycling activities and to be checked before each use for proper inflation and condition.
Proper inflation, care, and timely replacement will help to ensure that your bike' s operational characteristics
will be maintained, and unsafe conditions avoided.
Aventon Bikes recommends 30-50 PSI (2.0-3.5 BAR) for the stock tires on PACE . Always stay within the
manufacturer' s recommended air pressure range as listed on the tire sidewall.
It is critically important that proper air pressure is always maintained in pneum
overinflated tires may burst. Failure to always maintain the air pressure rating indicated on
Inflate your tires from a regulated air source with an available pressure gauge. Inflating your
tires from an unregulated air source could overinflate them, resulting in a burst tire. Even tires
equipped with built-in flat-preventative tire lines , like those that come with bikes by Aventon
Bikes, can and do get flats from punctures, pinch
becomes evident or a flat tire i
prior to removing the tire from the rim. Failure to remove all air pressure from the inner tube
Using aftermarket tires or inner tubes, not provided by Aventon Bikes may void your warranty,
create an unsafe riding condition, or damage to your bike by Aventon Bikes. If required by law,
ensure replacement aftermarket tires have su cient reflective sidewall striping.
For more information on tire or tube replacement procedures, or questions about tire inflation,
contact Aventon Bikes Product Support.
Support link: https://support.aventon.com/contact-us
may result in loss of control, and
mage to your bike could occur.
pressure has been removed from the inner tube
or Call: 1-866-300-3311
24