aventon Pace 350 User Manual page 11

Assembly
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are
not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult
a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1. Unpack the bike.
Open the bike box.With the help of another person capable of safely lifting a heavy object, remove the
Pace from the bike box. Carefully remove the packaging material protecting the bike frame and
components, as well as remove the small boxes attached to the fork. These are your charger and
accessories. Please recycle packaging materials especially cardboard and foam whenever possible.
Step 2. Remove all the package foam and ribbon.
.
Step 3. Loosen the stem bolts with a 5mm hex key
and turn 180 degree.
Step 5: Use 4mm hex key to remove all four
stem faceplate bolts.
Step 4. Make sure the handle bars stay on the
left side so after the handle bars are installed
the cables come out of the frame to the left side
of the bike. Make sure the cables are not twisted.
（Reference below pic)
10