Download Print this page

aventon Pace 350 User Manual page 20

Hide thumbs Also See for Pace 350:

Advertisement

DO NOT cover up the charger while it is charging. The charger air cools and needs to be
on a hard, flat surface in an open space. Use the charger with the indicator light facing upward.
DO NOT use when the charger is inverted, which can inhibit cooling and reduce charger lifespan.
DO NOT open the battery housing, which will void the warranty and can result in damage to
the battery, property or cause serious injury and/or death.
PACE 350/500 QUICK START GUIDE
GETTING STARTED
First, tap the power button on the battery to turn on. The current
charge level will be flashed upon four green LEDs (4 = full, 1 = near
empty), then one green LED to show the battery is turned on. Next,
press and hold the
button on the handlebar controls to turn on the
display. Now, your e-bike is ready to ride. To turn off, press and hold
"M" for 3 seconds.
The Pace ebike offers pedal assist. When using pedal assist, an
electric motor supplements the rider's own effort. To use the pedal
assist, simply start pedaling, then tap the "U" or "D" arrows to increase
or de crease the amount of pedal assist. Pedal assist will engage at
speeds up to 28 MPH for Pace 500 and 20 MPH for Pace 350.
pace 350
The Pace 350 /500E-Bike is equipped with a throttle, which is mounted
near the rider's left thumb, to propel the bike without pedaling. To use
the throttle, start pedaling then apply the throttle. Once the bike is
moving on throttle power, you can stop pedaling entirely and use your
thumb to control the speed of the bike. The throttle can propel you at
speeds up to 20 MPH.
Derailleur
On the right side of handlebar, next to the brake lever,
you can see two levers with 7-1 (For Pace 350)/8-1 (For
Pace 500). Those are derailleur levers. By pressing those
levers, you can make the chain move to di erent gears to
change your riding experience.
The motor stops when you: stop pedaling, squeeze the brake levers,
or release the throttle. Simply start pedaling again to re-engage the
motor.
BATTERY AND CHARGING
W
temperature conditions. To charge the battery, plug the charger into
the charging port and then connect the charger to a wall outlet. The
LED indicator light will be red when charging and will turn green when
charging is complete.
MAINTENANCE AND SERVICE
Properly maintaining your Pace 350/500 ensures its longevity and smooth
operation. Before assembling your bike, please watch the "How To
Assemble" video we've prepared for you. If you have questions during
the assembly process, please contact Aventon at (866) 300-3311 or
check link:
https://support.aventon.com/contact-us
SAFETY
You should wear an approved bicycle helmet every time you ride
a bicycle, regardless of the legal requirement to do so. You should
comply with local law when riding your Pace 350/500 Ebike.
18

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Pace 500