cOnnEcTIOn DIAGRAM
Audio amplifier
Digital Audio
USB devices
Home network
Analogue Audio
VcR/DVD Recorder
or
TV set
Satellite dish antenna
TV set
with LnB
The Installation Wizard
The first time you turn on the receiver, a "Quick Start Guide" menu will be open to assist you with the initial settings.
This menu will also appear after you do a Factory Reset.
Use the Green and Red keys on the remote control to navigate forward or back through the wizard steps. Press the
OK button to edit a parameter and select its value from the drop list that will appear on the right side of the screen.
cOUnTRy AnD MEnU LAnGUAGE
This is where you can set your country and the menu language related parameters of your digital receiver. Select
the language to be used for all menus.
Note: This does not change the language for information about programs shown in the EPG.
Press the Green key on the remote control to continue to Antenna settings.
Streaming Source
Select the Satellite TV signal source - The internal/local tuner, or a remote IP tuner from a connected SAT>IP
Server device.
54