Telestar S 410i HD Plus User Manual page 68

Reference transponder
Select a tranponder from the database or select none and enter the transponder parameters manually.
Frequency
Use this option to set the frequency of the transponder to search.
Reference transponder - Select a transponder from the satellite database or select 'none' to enter transponder
parameters manually.
Polarity
Use this option to set the polarisation of the signal between horizontal,
vertical, right and left circular.
Symbol rate
Use this option to set the symbol rate for the signal.
FEC
Use this option to set the FEc (Forward Error correction).
PIDs
Use this option to set the PIDs between automatic and manual. If you choose manual, you can set the individual
Audio and Video PIDs and the PcR.
Video PID
Use this option to manually set the Video PID.
Audio PID
Use this option to manually set the Audio PID.
PCR PID
Use this option to manually set the PcR PID.
Channels
•
Select All to search for all Free-to-Air and encrypted channels.
•
Select Free-to-air to search only for Free-to-air channels.
DVB-S2
Define whether searching shall cover DVB-S2 transponders as well.
Finding and storing the channels
Once the options are set, press the "Green" key on the remote control to start the channel search. Once a channel
search is started, a progress bar and list of channels found will be displayed. At any time, you may stop the search
by pressing Exit on the remote control. After the channel search is complete, press the "Green" function key on
the remote control to save the channel list and exit.
FAcTORy SETTInGS
Use this option to reset the receiver to default settings. This may be necessary when a large number of settings
have accidentally been made incorrectly, for example.
Access to factory defaults is protected by a PIn code ('0000' by default).
Factory Defaults
Press the "OK" key and confirm with the "Green" function key, if you want to reset the unit to the "Factory default"
settings.
68