Telestar S 410i HD Plus User Manual page 55

AnTEnnA SETTInGS
Satellites
To set up the receiver for the type of antenna connected, follow the instructions below.
Select the satellites you wish to receive with the receiver. Each of the satellites in the built-in satellite list is
configured with predefined default parameters. you may press the Blue button - Advanced settings - to edit these
values. See below details of the Advanced Settings.
ADVAncED SATELLITE SETTInGS
LNB Type
Select Universal for most standard LnBs, or Unicable if you have a Unicable LnB or Unicable multiswitch.
Satellite
Use this option to select the satellite for which you would like to set the position. Use the color keys on the remote
control, as shown at the bottom of the screen, to delete or add a satellite from the satellite list and set their
individual settings.
LOF Low and High Band
The LOF (Local Oscillator Frequency) of the LnB is usually printed on the LnB itself or in its documentation.
you can set the High and Low LOF frequencies to match the LnB here.
55