Control Panel - Telestar S 410i HD Plus User Manual

SInGLE cHAnnEL VIEW
Press the "Green" function key on your remote control to toggle between the Full Guide grid view and the Single
channel view. The Single channel view makes it easier to see an overview of programs or an individual channel,
e.g. to search for repeats of a movie or to control the timer for a specific channel.
MInI GUIDE
When the program info-banner is displayed, scroll right with the Right arrow key to the mini-Guide banner. The
program synopsis will be displayed above the banner. Press the Down arrow key and navigate with the arrow keys
through the programs listed on the mini Guide banner. The synopsis of each program is displayed and you may set
a reminder for future programs by pressing the OK key on the remote.

control Panel

In this chapter, all options of the control Panel menu will be described.
In each of the settings screens, use the Right arrow key to view the available options for each parameter on the
right side of the screen, press OK to effect a selection and the Left arrow key to go back to the parameter list on
the left side of the screen.
USER PREFEREncES
This is where you can set the basic parameters of your digital receiver.
Start-up mode
Select whether the receiver should display the main menu or switch to the last viewed channel when starting up
from standby mode.
User interface
Set user interface parameters such as the duration of displayed menus, the transparency level of the menus and
the font size used in menu screens.
History depth
you can set the history of previously selected programmes from 1-5, and then use the "Back" key on the remote
control to switch between them.
64