ICP DAS USA DS-700 Series Manual page 6

Step 6: The MiniOS7 update completed when disply
the "X" icon on the right-top corner of the windows to close it.
Step 7: Disconnect the INIT* and GND pins
module.
Step 8: Switch off
then switch it back on again to rebbot the module to
"Normal" operation.
Firmware Update via 7188XW.exe (Ver. 1.0/Aug. 2018)
the Power to the DS-700 module and
[End file xxx]
of DS-700
Open INIT* and
GND pins
message. Then click
Page: 5