Fcc Compliance Statement - Advantech S10A User Manual

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, includ-
ing interference that may cause undesired operation.
CAUTION!
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of
the following measures:
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
Exposure to Radio Frequency Radiation.
The radiated output of this device is far
below the FCC radio frequency exposure
limits. Nevertheless, the device shall be
used in such a manner that the potential
for human contact during normal opera-
tion is minimized. When connecting an
external antenna to the device, the
antenna shall be placed in such a manner
to minimize the potential for human con-
tact during normal operation. In order to
avoid the possibility of exceeding the FCC
radio frequency exposure limits, human
proximity to the antenna shall not be less
than 20cm (8inches) during normal opera-
tion.
S10A User Manual
ii