FCC ID: M82 MITW101 Computer MIT-W101 User Manual Ver 0.1 MIT-W101 User Manual...
Page 2
Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
Products that contain the radio transmitter are labeled with CE alert marking and may also carry the CE logo. MIT-W101 User Manual FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 4
20cm (8inches) during normal operation. MIT-W101 User Manual I the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
FCC ID: M82 MITW101 – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages Safety Instructions 1. Read these safety instructions carefully. 2.
Lithium-Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store batteries within normal MIT-W101 User Manual room temperature ranges.
This user manual outlines all you need to know to set up and use your MIT-W101. If you have any further questions or queries, contact our technical support team via our website: http://www.advantech.com.tw/...
• Optional accessory to meet 6ft drop and variety of user scenario. 1.3 Package Contents Ensure all the following items are present when you receive your MIT-W101. If any of these items are missing, contact your vendor immediately. Screens used in this manual are for illustrative purposes only.
FCC ID: M82 MITW101 Projective capacitive multiple touch screen I/O ports • USB 3.0 x 1 • USB 2.0 x 1 • Micro HDMI x 1 • Audio x 1 Connectivity LED indicator • Blue: when Wi-Fi / BT module is on HDD LED indicator •...
FCC ID: M82 MITW101 Component I/O ports cover Audio Jack USB 3.0 USB 2.0 Micro HDMI 1.6.5 Top View Component Function buttons Built-in MIC Power button 1.6.6 Bottom View Component Docking connector AC-in jack...
2.1 Installing the Rubber Bumpers (Optional) To protect the housing case of MIT-W101, install the rubber bumpers. 1. Install the rubber bumpers on the left and right side of the MIT-W101. 2. Make sure the rubber bumpers are aligned and locked on the indents.
FCC ID: M82 MITW101 2.2 Removing the Rubber Bumpers (optional) 1. Unscrew the rubber bumpers from the rear of the tablet PC. 2. Remove the rubber bumpers on the left and right.
1. Make sure the system is turned off. 2. Attach the expansion module connector to the MIT-W101. MIT-M 3. Screw to secure the expansion module onto the MIT-W101. Please assure the expansion module was put on the right position and the screws was fastened when install the module on device.
FCC ID: M82 MITW101 3.1 Connecting the Power Before you can use your MIT-W101, you must fully charge the battery. Connect the power adapter as shown and leave to charge for: • A minimum of 2 hours when using the internal battery •...
3.3 Connecting USB Devices You can connect peripheral devices, such as a USB keyboard and mouse, as well as other wireless devices using the USB ports on the left side of the MIT-W101. 3.4 Connecting Headphones You can connect a pair of headphones using the headphone jack on the left side of the MIT-W101.
4.1 Controlling the MIT-W101 4.1.1 Using the Touch Screen The MIT-W101 is equipped with touch screen technology, for ease of use when you are on the go. Simply tap the screen with your finger to select icons and run applications.
FCC ID: M82 MITW101 4.1.4 Using the On-Screen Keyboard 1. Click on icon in the taskbar to bring up the on-screen keyboard. 2.Use your finger or stylus pen to tap and enter letters, numbers and symbols as you would with a regular keyboard. To type capital letters tap the lock icon on the on-screen keyboard.
Page 26
FCC ID: M82 MITW101 4. Select the handwriting icon. 5. Use your finger and stylus pen to write on screen.
FCC ID: M82 MITW101 3. To move the brightness control bar up / down to increase / decrease brightness. 4.1.6 Adjusting the Volume 1. Tap the Settings icon on the right.
Page 29
FCC ID: M82 MITW101 2.Tap the Volume icon on the system tray. 1. Move the slide to adjust volume.
Contact a wireless service provider for more information. The MIT-W101 comes pre-loaded with WLAN module; you can send and receive signals to a Wi-Fi network then synchronize files. A wireless network can be added either when the network is detected or by manually entering settings information.
Page 34
FCC ID: M82 MITW101 2. Click the wireless connection icon in the notification area. 3. Select one of the wireless connections and click Connect. 4. You are prompted to enter a Security key for secure access. Contact the network administrator for this key.
Page 35
FCC ID: M82 MITW101 5. Enter the required Security key and then tap Next to connect. 6. The wireless connection is negotiated. The wireless connection icon in the notification area shows a connected status whenever a wireless connection is present.
FCC ID: M82 MITW101 airplane mode or turn off wireless devices 5.2 Bluetooth Connections The MIT-W101 comes with built-in Bluetooth functionality that allows you to connect and communicate with other Bluetooth-enabled devices. 5.2.1 Setting Up Bluetooth Follow these instructions to set up a Bluetooth connection.
Page 37
FCC ID: M82 MITW101 3. Add more Bluetooth device by clicking on Add a device. 4. Select Yes for comparing both MIT-W101 and the Bluetooth device after passkey is confirmed.
Page 38
FCC ID: M82 MITW101 5. The Bluetooth device is successfully added into MIT-W101 when the process is complete. It is recommended that you use a passkey to prevent unauthorized access to your MIT-W101.
FCC ID: M82 MITW101 6.1 Checking Battery Status As it is likely you will be using your MIT-W101 when out and about, it is important that you monitor the battery status regularly, to ensure you do not run out of power at a critical moment.
LCD screen cleaner. 6.2.3 Cleaning the MIT-W101 1. Turn off the MIT-W101 and unplug the power cord. 2. Wipe the screen and exterior with a soft, damp cloth moistened only with water. Do not use liquid or aerosol cleaners on the screen, as these will discolor the finish and damage the screen.
FCC ID: M82 MITW101 A.1 Specifications Feature Description Microsoft Windows Embedded 8 Standard Operating System Microsoft Windows 7 Professional for Embedded System (Optional) Processor Intel® Celeron® Processor N2930 Max. speed Quad Core 1.83GHz ® Chipset Intel Bay Trail-M SoC Memory One DDR3L 1333MHz SO-DIMM, up to 8GB Storage One mSATA SSD, up to 128GB...
Page 44
FCC ID: M82 MITW101 Feature Description Security 1. Password security One USB 3.0/ 2.0 One USB 2.0 One HP/MIC combined jack I/O Ports One Micro HDMI type D One DC-in jack One Expansion port 8-pin One Docking port 32-pin Audio Output One 1 watt speaker One MSR (On optional expansion module) Expansion Port...
Battery is fully charged (100%) Battery is charging Battery is fully charged (100%) Battery Low (< 10 %) A.2 Optional Accessories A.2.1 External Battery You can use an external battery to extend the power of your MIT-W101. Battery specification: 2860 mAh, 11.1V...
Page 46
FCC ID: M82 MITW101 A.2.1.2 Installing the External Battery 1. Align and insert the battery on the MIT-W101. 2. Lock to secure the battery once it is properly to be inserted. A.2.1.2 Removing the External Battery Repeat the above steps in reverse order to remove the battery.
A.3.1.1 Inserting an SSD You can insert an SDD to store data, which needs to be later transferred to another machine, or to simply expand the storage capacity of the MIT-W101. 1. Open the SSD card compartment cover. 2. Insert the SDD, facing upwards, until it clicks into place.
Page 49
FCC ID: M82 MITW101 3. Screw and fix SSD. 4. Close the SDD compartment cover.