Replacing The Hard Disk Drive; Removing The Battery - Advantech S10A User Manual

S10A User Manual

Replacing the Hard Disk Drive

1. Insert the hard disk into the slot with the connector facing
down.
2. Connect the hard disk connector.
3. Screw the left compartment cover back.

Removing the Battery

1. Make sure the system is turned off.
2. Move the power switch to the left to
ensure battery power is completely
cut off. See "Using the Power
Switch" on page 8.
3. Unscrew the battery
compartment cover.
4. Remove the battery connector.
5. Lift the battery off the
compartment.
17
SW1
Lock Lock
Lock Lock