Removing The Hard Disk Drive - Advantech S10A User Manual

2. Screw the memory compartment
cover back.

Removing the Hard Disk Drive

S10A comes with an 80G PATA hard disk drive. If more space is
required for your application or there is a need to transport the
hard disk content, follow the steps below to remove the hard
disk drive.
1. Make sure the system is turned off.
2. Move the power switch to the left to
ensure battery power is completely
cut off. See "Using the Power Switch"
on page 8.
3. Unscrew the left compartment
cover.
4. Remove other connectors, such
as camera.
5. Lift to remove the hard disk
drive connector.
6. Pull out the hard disk drive.
S10A User Manual
Lock Lock
SW1
16