Configuring The Function Buttons; Using The Mode Button - Advantech S10A User Manual

S10A User Manual

Configuring the Function Buttons

The F1, F2, F3, S1 (F4) and S2 (F5) can be configured as shortcuts
to access your favorite or frequently used programs.
1. Press the function button to
which you want to assign a
program shortcut to. The
function button screen
appears.
2. Tap
on the hard drive.
3. To remove a configured
program, tap
4. Tap OK to save all new settings.
Once you have assigned a function to one of the buttons, you can
change it at a later date by tapping on the Mode icon on the
system tray.
Select Function Key Setting from the menu and follow the
procedure described above from step 2 to make any changes.

Using the Mode Button

Press
MODE
• When mode is enabled, press
brightness setting.
• When mode is disabled,
functions as the F5 key. If a barcode scanner is installed,
functions as the barcode switch key.
27
to locate the program
.
to enable or disable mode.
and to adjust the
S1 S2
functions as the F4 key while
S1
S2
S2