Installing The Rubber Bumpers; Removing The Rubber Bumpers; Inserting A Memory Card - Advantech PWS-770 User Manual

2.1 Installing the Rubber Bumpers

To protect the housing case of PWS-770, install the rubber bumpers.
1. Install the rubber bumpers on the left and right side of PWS-770.
2. Make sure the rubber bumpers are aligned and locked on the indents.

2.2 Removing the Rubber Bumpers

From the rear of the tablet PC, remove the rubber bumpers.

2.3 Inserting a Memory Card

You can insert an SD card to store data, which needs to be later transferred to
another machine, or to simply expand the storage capacity of the PWS-770.
1. Open the SD card compartment cover.
2. Insert the SD card with the metal contacts facing upwards, until it clicks into
place.
PWS-770 User Manual 8