Page 8
The following instructions are in english. Localized versions can be found with the QR-code below. guide.danalock.com...
Page 9
Add the Danapad in the Danalock App Set up pin codes for your Danapad Open the Danalock App and add the Danapad by selecting ”Add Go to: Menu > Accessory devices > Danapad > Pin codes device” in the menu tab. When the Danapad has been enrolled you and choose to add a new pin code.
Page 10
Controlling the Danapad Dismounting The Danapad is ready to use when it has been paired with a Danalock or Universal Module and has been set up with one or more pin codes. Locking: Press pin code followed by lock button. Success will respond with a single green blink.
Page 11
LED-Signals Operations The keypad indicates the status of several operations with different Operation Input action LED response colors: Turn on Danapad Insert batteries Display lights up green Activate light only press unlock button Display lights up green Clear input Hold unlock button Display blinks red once Input timeout Input clears after 10 sec with...
Page 12
Firmware upgrade In the Danalock App navigate to your Danapad settings and select ”Firmware” and then ”Upgrade firmware”. Make sure to keep your phone near the Danapad during the entire firmware upgrade process.