Table of Contents
Advertisement
Sanding Drum
Drum dimensions, L x Dia
Drum speed
Abrasive installed
Drum elevation per one rotation of handwheel
Depth stop
Stop nut elevation per one rotation
Conveyor
Conveyor speed
Conveyor table dimensions
Conveyor height from floor
(on OPTIONAL stand)
Dust collection
Dust port outside diameter
Minimum extraction volume required
Dimensions
Assembled dimensions, mounted to OPTIONAL
open or closed stand, LxWxH
Shipping carton, base machine
Shipping carton, open stand (OPTIONAL) LxWxH
Shipping carton, closed stand (OPTIONAL) LxWxH
Weights
Net weight, base machine only (approx.)
Shipping weight, base machine only (approx.)
1
Subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
3
Use of a carrier or backer board (not provided) is recommended for cuts 1/16" or less. See sect. 9.3.
L=length, W=width, H=height, Dia=diameter
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
22-1/4 x 5 in. (565 x 127mm)
Open stand
Closed stand
44-1/2 x 27-1/2 x 28-1/4 in.
7
1725 RPM
80 Grit
1/16 in.
0.100 in.
infinitely variable within 0 to 10 FPM (0-3 MPM)
23 x 21-3/4 in.
(584 x 552.5 mm)
34 in. (864 mm)
4 in. (100 mm)
550 CFM (15.6 CMM)
42 x 24 x 52 in.
(107 x 61 x 132 cm)
(113 x 70 x 71.75 cm)
38 x 20 x 4-1/2 in.
(96.5 x 50.8 x 11.4 cm)
177 lbs. (80.5 kg)
244 lbs. (111 kg)
25-1/4 x 5 in. (642 x 127mm)
26 x 21-3/4 in.
(660.4 x 552.5 mm)
33-3/4 in. (857 mm)
45 x 24 x 52 in.
(114.3 x 61 x 132 cm)
44-1/2 x 27-1/2 x 28-1/4 in.
(113 x 70 x 71.75 cm)
44 x 20 x 4-1/2 in.
(112 x 50.8 x 11.4 cm)
40-9/16 x 19-11/16 x 30-
5/16 in. (103 x 50 x 77 cm)
183 lbs. (83 kg)
256 lbs. (116.5 kg)
Advertisement
Table of Contents
