LG PQCPA11A0E Installation & Owner's Manual page 93

3
Controlling & monitoring the air conditioner window
It displays the air conditioner control setting selected from the list of the air conditioner group and the
air conditioner list to control.
Operation mode
The operation method of the air conditioner can be set at the operation mode. The operation modes to
set are as follows:
Item
It operates the cold operation. The cold operation can set the desired
temperature to 18°C ~ 30°C
Note: Setting the desired temperature
Because too much cooling is harmful for health, set the suitable
desired temperature. About 5°C is better for the difference
between the indoor temperature and the outdoor temperature.
If the desired temperature is higher than the indoor temperature
during the cold operation, it does not operate the cold operation,
but the ventilation.
It drives the heating operation. The heating operation can set the
desired temperature to 18°C ~ 30°C
Note: Setting the desired temperature
The excessive heating is harmful for the health, so set the
suitable desired temperature. About 5°C is better for the
difference between the indoor temperature and the outdoor
temperature. If the desired temperature is lower than the indoor
temperature during the heating operation, it does not operate the
heating operation, but the ventilation.
The dehumidification eliminates moisture. It can effectively eliminate
moisture during the rainy season or at the high humidity condition.
When it is selected, the desired temperature can not be set.
It circulates the fresh air. The ventiliation only may be used in Spring
and Autumn. When it is selected, the desired temperature can not be
set.
It evaluates the indoor condition and maintains the optimal condition
automatically.
3. ACP operation by using the LG ACCS
Description
Installation/Owner's Manual
3-11