Entering The Indoor Unit & Ventilator Information; If The Acp Is Connected To The Ac Manager - LG PQCPA11A0E Installation & Owner's Manual

Entering the indoor unit & ventilator information
When the installation at the previous steps is completed, finally, the information of the outdoor unit, the
indoor unit, and the ventilator connected to the ACP should be entered. The air conditioner can be
controlled by using the ACP only after this information is entered.
There are two methods to enter the information of the outdoor unit, the indoor unit, and the ventilator
depending on the condition as follows:
• When the ACP is connected to the AC Manager, register the information by using the AC Manager
• When the ACP is not connected to the AC Manager, register the information by using the LG
ACCS program of the ACP

If the ACP is connected to the AC Manager

When the AC Manager is installed at the specific PC to connect to the ACP, the information set at the
AC Manager is automatically entered into the ACP. So, the ACP can control the air conditioner even if
the information of the outdoor unit, the indoor unit, and the ventilator is not entered.
Note: How to use the AC Manager
For more information to use the AC Manager, see the Owner's manual of the AC Manager.
Installation/Owner's Manual
2. Installing ACP
2-49