LG PQCPA11A0E Installation & Owner's Manual page 87

1
Menu selection buttons
You can select the menu at the menu selection button to perform the functions such as controlling and
monitoring. The ACP consists of the following eight menus.
Item
2
LG ACCS window buttons
You can exit or minimize the LG ACCS window.
Item
Air conditioner / Perform the operation change, the Lock all, and the
temperature lock of the air conditioner connected to the ACP.
Ventilating / Perform the operation change and the Lock all of the
ventilator connected to the ACP.
Schedule / Start and stop the indoor unit of the air conditioner
connected to the ACP according to the reserved schedule.
Peak power / Set the peak operation ratio by setting the operation ratio
of the whole air conditioner for the operation ratio of the air conditioner
not to exceed the setting value. If this function is set to the ACP, the
demand power control function can not be used simultaneously.
Demand / Set the demand power control function by monitoring the
whole power of the indoor unit of the air conditioner at reat time not to
exceed the target power. If this function is set to the ACP, the peak
operation ratio control function can not be used simultaneously.
Monitoring / Monitor the operation and error status of all air
conditioners connected to the ACP.
Error history / View the history of the errors occurred at the air
conditioner connected to the ACP.
Wattage / Wattage consumed at the air conditioner connected to the
ACP.
System setup / Register, change, or delete the information about the
air conditioner and the ventilator connected to the ACP.
Minimize the LG ACCS window to be displayed at the task bar at the
bottom only.
Not used.
Exit the LG ACCS setup and the LG ACCS window.
3. ACP operation by using the LG ACCS
Description
Description
Installation/Owner's Manual
3-5