LG PQCPA11A0E Installation & Owner's Manual page 79

8.
Enter the ventilator group name and the information of the ventilator. When each displayed item is
clicked, it's color is changed to yellow for its contents to be directly entered or the list box is
displayed. Enter the setting value suitable for each item. See the following table for the description
on the setting item.
Enter and modify the ventilator group
name and the ventilator information.
Item
Group name
Type
Ventilator name
Physical address
Model name
Maximum consumed power
However, we recommend to use
'Physical address' item as set.
Enter the ventilator group name for the user to easily recognize.
Leave this information as it is without changing.
Enter the ventilator name for the user to easily recognize.
Enter the physical address of the ventilator. When [Default input]
button is pressed, it is automatically created by inheriting the higher
information.
Physical address is composed of 4 numbers.
The first and second number is the G/W number and ventilator group
number, respectively. This can be set only within the entered
information from existing [G/W information] and [Ventilator group input]
menu. The third number is the ventilator number, which cannot be
duplicated within the same ventilator group number and must be set
within the range of 0~15. The fourth number is the Master and Slave
setting. This value is set to 0 (Master) and must not be changed.
Enter the model name of the ventilator.
Enter the maximum consumed power for the ventilator to use. The
maximum consumed power depends on the model.
Description
Installation/Owner's Manual
2. Installing ACP
2-65