LG PQCPA11A0E Installation & Owner's Manual page 113

Exception handling schedule display window
Stop All window
order to deselect this function, click [Deselect] radio button and then [Done] button.
It has the priority higher than the schedule or the exception handling schedule, so all air conditioners
are stopped at the specified time even when the air conditioner operates according to the schedule.
However, it operates only when the specified schedule is applied and operates (it does not operate at
the schedule stopped condition).
The method to specify the schedule at the exception handling date is same
to the general schedule setup.
At the view mode, the schedule about the exception handling schedule is
displayed at the exception handling schedule display window. While, at the
setup mode, you can select the period to set the exception handling
schedule.
In order to schedule for the exception handling schedule, you should check
the exception handling schedule at the exception handling list and specify
the related data at the Date selection window.
Make sure that the title of the exception handling schedule is displayed at
'Title input' field of the Date selection window and the related date is
displayed at 'Schedule' item at the exception handling schedule display
window. If the date is not displayed, you should specify the exception
handling schedule by the Date selection window first.
One column of the display window corresponds to 10 minutes, and, at the
setup mode, more than one period can be deleted by clicking the set period
again.
You can delete the priod by clicking the period again.
The time with the exception handling schedule set is displayed in sky blue
while the period selected by clicking is displayed in green.
When you select the period with the exception handling schedule set, the
setting of the related schedule is displayed at the schedule control setup
window at the left of the screen.
3. ACP operation by using the LG ACCS
It can stop all air condition system at the specified
time. It is optional, so it is not the essential item to
be set for setting the exception handling schedule.
In order to perform this function, click [Setup] radio
button, set the time, and click [Done] button. But, in
Installation/Owner's Manual
3-31