LG PQCPA11A0E Installation & Owner's Manual page 75

Setting the ventilator
Set the ventilator as follows. In this case, the method for setting the ventilator is described by the
assumption that five ventilators are connected to two groups (Group number 0 and 1) respectively.
1.
Click 'Ventilating setup' tab at 'System setup' menu of the LG ACCS.
2.
To set up the ventilator, you must first enter the group number of the ventilator. The information of each
outdoor unit is used as the physical group information connecting the ventilator. When you click on
[Enter ventilator group] button in the 'System setting' screen of LG ACCS, the window to set the group
number is displayed.
Click ʻSystem setupʼ
menu. And then, click
ʻVentilating setupʼ tab.
Click [Vent Group Input]
button to display ʻVent
Group information inputʼ
Installation/Owner's Manual
2. Installing ACP
window.
2-61