Troubleshooting - Hatco MDW Series Installation And Operation Manual

TROUBLESHOOTING

WARNING
This unit must be serviced by qualified
personnel only. Service by unqualified personnel
may lead to electric shock or burn.
Symptom
Light bulb not working.
Food cavity not hot enough.
Food cavity too hot.
No heat, but light works.
No heat and no light.
All manuals and user guides at all-guides.com
Probable Cause
Light bulb defective.
Power turned OFF.
Temperature control set too low.
Heating element(s) not working.
Temperature control not working
properly.
Air circulating fan not working
properly.
Temperature control set too high.
Temperature control not working
properly.
Temperature control set too low.
Heating element(s) not working.
Temperature control not working
properly.
Unit turned OFF.
Circuit breaker tripped.
10
WARNING
ELECTRIC SHOCK HAZARD: Turn the power
switch OFF, unplug the power cord, and allow
the unit to cool before performing any
maintenance or cleaning.
Corrective Action
Replace light bulb.
Turn unit ON.
Adjust temperature control to a
higher setting.
Contact Authorized Service Agent
or Hatco for assistance.
Contact Authorized Service Agent
or Hatco for assistance.
Contact Authorized Service Agent
or Hatco for assistance.
Adjust temperature control to a
lower setting.
Contact Authorized Service Agent
or Hatco for assistance.
Adjust temperature control to a
higher setting.
Contact Authorized Service Agent
or Hatco for assistance.
Contact Authorized Service Agent
or Hatco for assistance.
Turn unit ON.
Reset circuit breaker. If circuit
breaker continues to trip, contact
Authorized Service Agent or
Hatco for assistance.
Form No. MDWM-0608