Hatco MDW Series Installation And Operation Manual

Hatco MDW Series Installation And Operation Manual

Mini display warmer

Advertisement

Quick Links

All manuals and user guides at all-guides.com
Mini Display Warmer
Installation and Operating Manual
Do not operate this equipment unless
you have read and understood the
contents of this manual! Failure to follow
the instructions contained in this manual
may result in serious injury or death. This
manual
contains
important
information concerning the maintenance,
use, and operation of this product. If
you're unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
MDW Series
I&W #07.05.176.00
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en este
manual puede resultar en un serio lesión
o
safety
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted no
puede entender el contenido de este
manual
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
muerte.
Este
manual
por
favor
pregunte
© 2008 Hatco Corporation
contiene
a
su

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MDW Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Hatco MDW Series

  • Page 1 Keep this supervisor. Almacenar este manual en manual in a safe location for future una localización segura para la referencia reference. futura. © 2008 Hatco Corporation...
  • Page 2: Table Of Contents

    Additional information can be found by visiting our web site at www.hatcocorp.com. INTRODUCTION The Hatco Mini Display Warmer is designed to hold Hatco recommends all installation, operating, and prepared foods for prolonged periods of time while safety information appearing in this manual be read maintaining that “just-made”...
  • Page 3: Important Safety Information

    • Plug unit into a properly grounded electrical service is required on this unit, contact an outlet of the correct voltage, size, and plug Authorized Hatco Service Agent or contact the configuration. If the plug and receptacle do Hatco Service Department at 800-558-0607 or not match, contact a qualified electrician to 414-671-6350;...
  • Page 4: Model Description

    The unit has incandescent lighting to heighten product awareness. The Hatco Mini Display Warmer holds and serves products at temperatures up to 180°F (82°C). Perfect for convenience stores, restaurants, Figure 1. Model MDW-2X recreational facilities, theme parks, and anywhere there is limited counterspace.
  • Page 5: Specifications

    Figure 3. Plug Configuration voltage, size, and plug configuration. If the plug and receptacle do not match, contact a qualified NOTE: Receptacle not supplied by Hatco. electrician to determine and install the proper voltage and size electrical outlet. Electrical Rating Chart...
  • Page 6: Installation

    NOTE: To prevent delay in obtaining warranty following installation instructions must be performed coverage, fill out and mail in the warranty before plugging in and operating the unit. card to Hatco. 3. Remove tape and protective film from all surfaces of unit. WARNING FIRE HAZARD: Locate the unit a minimum of 1″...
  • Page 7: Reversible Access Door

    All manuals and user guides at all-guides.com INSTALLATION Reversible Access Door Configurable Access Door Any door may be changed from hinged left to hinged Any door may be exchanged with a fixed glass panel right. to suit the installation. 1. While holding the door securely, remove the 1.
  • Page 8: Operation

    All manuals and user guides at all-guides.com OPERATION General Use the following procedure to turn on and operate the Hatco Mini Display Warmer. WARNING Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment. 1. Plug unit into an electrical outlet of the correct voltage, size and plug configuration.
  • Page 9: Maintenance

    General Removing Glass for Cleaning 1. While holding the fixed glass panel securely, The Hatco Mini Display Warmer is designed for remove the four screws attaching the two maximum durability and performance, with minimum brackets to the cabinet. Keep hardware.
  • Page 10: Display Light Bulb Replacement

    Hatco shatter-resistant bulbs meet NSF standards for food holding and display areas. Use only Genuine Hatco Replacement Parts When replacing the light bulb, use Hatco part when service is required. Failure to use Genuine number 02.30.043.00. Hatco Replacement Parts will void all warranties and may subject operators of the equipment to 6.
  • Page 11: Installing A Graphic Image

    All manuals and user guides at all-guides.com OPTIONS Installing A Graphic Image Relocating the Graphic Panel Use the following procedure to apply a graphic Use the following procedure to change the location image to the plexiglass graphic panel in the top of the graphic panel at the top of the unit.
  • Page 12: Troubleshooting

    Temperature control set too low. Adjust temperature control to a higher setting. Heating element(s) not working. Contact Authorized Service Agent or Hatco for assistance. Temperature control not working Contact Authorized Service Agent properly. or Hatco for assistance. Air circulating fan not working Contact Authorized Service Agent properly.
  • Page 13: Hatco Limited Warranty

    (1) Additional Year Parts-Only Warranty: Hatco’s liability and Buyer’s exclusive remedy Conveyor Toaster Elements (metal sheathed) hereunder will be limited solely, at Hatco’s option, to Drawer Warmer Elements (metal sheathed) repair or replacement by a Hatco-authorized service Drawer Warmer Drawer Rollers and Slides...
  • Page 14 All manuals and user guides at all-guides.com NOTES Form No. MDWM-0608...
  • Page 15 All manuals and user guides at all-guides.com NOTES Form No. MDWM-0608...
  • Page 16: Authorized Parts Distributors

    All manuals and user guides at all-guides.com HATCO AUTHORIZED PARTS DISTRIBUTORS ALABAMA IOWA NEW YORK TEXAS Jones McLeod Appl. Svc. Electric Motor Service Co. Acme American Repairs, Inc. GCS Service Birmingham 205-251-0159 Davenport 319-323-1823 Brooklyn 718-456-6544 Fort Worth 800-433-1804 Goodwin Tucker Group Alpro Service Co.

This manual is also suitable for:

Mdw-1xMdw-2x

Table of Contents