Table of Contents
Advertisement
Quick Links
www.hatcocorp.com
Register Online!
(see page 2)
Installation and Operating Manual
WARNING
Do not operate this equipment unless you
have read and understood the contents of
this manual! Failure to follow the
instructions contained in this manual may
result in serious injury or death. This
manual
contains
important
information concerning the maintenance,
use, and operation of this product. If
you're unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
Mini Display Warmer
MDW Series
P/N 07.04.405.00
ADVERTENCIA
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en este
manual puede resultar en un serio lesión
safety
o
muerte.
Este
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted no
puede entender el contenido de este
manual
por
favor
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
Ne pas utiliser cet équipement sans avoir
lu et compris le contenu de ce manuel !
Le
contenues dans ce manuel peut entraîner
de graves blessures ou la mort. Ce
manual
contiene
manuel
importantes
l'utilisation et le fonctionnement de ce
produit. Si vous ne comprenez pas le
contenu de ce manuel, veuillez le signaler
pregunte
a
su
à votre supérieur. Conservez ce manuel
dans un endroit sûr pour pouvoir vous y
référer plus tard.
AVERTISSEMENT
non-respect
des
instructions
contient
des
informations
concernant
l'entretien,
© 2011 Hatco Corporation
Advertisement
Table of Contents
Related Manuals for Hatco MDX-2X
Summary of Contents for Hatco MDX-2X
- Page 1 à votre supérieur. Conservez ce manuel manual in a safe location for future supervisor. Almacenar este manual en dans un endroit sûr pour pouvoir vous y reference. référer plus tard. una localización segura para la referencia futura. © 2011 Hatco Corporation...
-
Page 2: Table Of Contents
INTRODUCTION The Hatco Mini Display Warmer is designed to hold prepared This manual provides installation, safety, and operating foods for prolonged periods of time while maintaining that “just- information for the Mini Display Warmer. -
Page 3: Important Safety Information
Ensure proper supervision of children and keep them away and size electrical receptacle. from the unit. • Turn OFF power switch, unplug power cord, and allow Hatco Corporation is not responsible for the actual food unit cool before performing cleaning, product serving temperature. -
Page 4: Model Description
The unit has incandescent lighting to heighten product awareness. The Hatco Mini Display Warmer keeps food at safe serving temperatures by circulating hot air throughout the entire cabinet. Perfect for convenience stores, restaurants, recreational facilities, theme parks, and anywhere there is limited counter space. -
Page 5: Specifications
If plug and receptacle do not match, contact a qualified electrician to determine and install the proper voltage and size electrical receptacle. CEE 7/7 Schuko Figure 3. Plug Configuration NOTE: Receptacle not supplied by Hatco. Electrical Rating Chart Model Voltage Watts... -
Page 6: Installation
INSTALLATION General 1. Remove the unit from the shipping carton. The Mini Display Warmer is shipped with most components NOTE: To prevent delay in obtaining warranty coverage, installed and ready for operation. The following installation complete online warranty registration. See the instructions must be performed before plugging in and operating IMPORTaNT OWNER INFORMaTION section for the unit. -
Page 7: Reversible Access Door
INSTALLATION Reversible Access Door Configurable Access Door access door(s) may be hinged on either the left or right side for a door can be exchanged with any glass panel to suit the convenience. Use the following procedure to reverse the access installation site. -
Page 8: Operation
OPERATION General Use the following procedure to turn on and operate the Hatco Mini Display Warmer. WARNING Read all safety messages in the IMPORTANT SAFETy INFORMATION section before operating this equipment. Startup 1. Plug unit into an electrical receptacle of the correct voltage, size, and plug configuration. -
Page 9: Maintenance
MAINTENANCE General Removing a Glass Panel The Hatco Mini Display Warmer is designed for maximum 1. While holding the glass panel securely, remove the screws holding one of the glass brackets to the unit. durability and performance, with minimum maintenance. -
Page 10: Display Light Bulb Replacement
Breakage of light bulbs have a threaded base). not specially coated could result in personal injury and/or NOTE: Hatco shatter-resistant bulbs meet NSF standards for food contamination. food holding and display areas. For 120 volt Use only Genuine Hatco Replacement Parts when service applications, use Hatco P/N 02.30.043.00. -
Page 11: Troubleshooting Guide
Unit connected to incorrect power supply. Verify with qualified personnel that power supply matches unit specification. Temperature Control is defective. Contact an authorized Hatco Service agent or Hatco for assistance. No heat, but light works. Temperature Control set too low. -
Page 12: Options And Accessories
OPTIONS AND ACCESSORIES Hood with Backlit Sign Cutout Relocating the Graphic Panel an optional hood with a backlit sign cutout is available for all Use the following procedure to change the location of the backlit sign on the unit. models. The hood and sign can be rotated to face any side of the unit. -
Page 13: Limited Warranty
Hatco’s option, to repair or replacement using Drawer Warmer Elements (metal sheathed) new or refurbished parts or Product by Hatco or a Hatco- Drawer Warmer Drawer Rollers and Slides authorized service agency (other than where Buyer is located... -
Page 14: Form No. Mdwm
NOTES Form No. MDWM-0311... - Page 15 NOTES Form No. MDWM-0311...
-
Page 16: Authorized Parts Distributors
HATCO AUTHORIzED PARTS DISTRIBUTORS ALABAMA IOWA NEW yORK TEXAS Jones McLeod appl. Svc. Electric Motor Service Co. acme american Repairs, Inc. GCS Service Birmingham 205-251-0159 Davenport 319-323-1823 Brooklyn 718-456-6544 Fort Worth 800-433-1804 Goodwin Tucker Group alpro Service Co. armstrong Repair Service...