Hatco MACHO NACHO FDW-1-MN Series Installation And Operating Manual
Chip warmer
Hide thumbs
Also See for MACHO NACHO FDW-1-MN Series:
- Brochure & specs (12 pages) ,
- Replacement parts list (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Quick Links
MACHO NACHO
FDW-1-MN & FST-1-MN Series
This manual contains important safety information
concerning the maintenance, use and operation of
this product. Failure to follow the instructions
contained in this manual may result in serious injury.
If you are unable to understand the contents of this
manual, please bring it to the attention of your
supervisor. Do not operate this equipment unless
you have read and understood the contents of
this manual.
Chip Warmer
Installation &
Operating Manual
I&W #07.05.087.00
Este manual contiene importante información sobre
seguridad concerniente al mantenimiento, uso
y operación de este producto. Cualquier falla en
el seguimiento de las instrucciones contenidas en
este manual puede resultar en un serio daño. Si usted
no puede entender el contenido de este manual por
favor pregunte a su supervisor. No opere este equipo
al menos que haya leído y comprendido el contenido
de este manual.
™
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hatco MACHO NACHO FDW-1-MN Series
Summary of Contents for Hatco MACHO NACHO FDW-1-MN Series
- Page 1 MACHO NACHO FDW-1-MN & FST-1-MN Series This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow the instructions contained in this manual may result in serious injury. If you are unable to understand the contents of this manual, please bring it to the attention of your supervisor.
-
Page 2: Table Of Contents
This manual provides the installation, safety and operating instructions for the Macho Nacho Chip Warmers. We recommend all installation, operating and safety instructions appearing in this manual be read prior to installation or operation of your Hatco Macho Form No. MNM-0702 Installation...4 Set-Up ...4 Operation...5... -
Page 3: Important Safety Instructions
Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. -
Page 4: Model Description
The chip slide and floor panels are removable for ease of cleaning. FDW-1-MN MODEL The FDW-1-MN Model is built of stainless steel with tempered glass sides and doors. The unit holds up to 25 lbs. (11 kg) of chips. FST-1-MN MODEL The FST-1-MN Model is built of stainless steel and aluminum with tempered glass sides and doors. -
Page 5: Specifications
WARNING To prevent any injury, discontinue use if power cord is frayed or worn. Model Voltage FDW-1-MN 220-230 (CE) 230-240 (CE) FST-1-MN 220-230 (CE) 230-240 (CE) DIMENSIONS Width... -
Page 6: Installation
70°F (21°C). Form No. MNM-0702 Install chip deflector in slots located behind upper door panel. Chip Deflector Floor Panels Figure 5. Set-Up (FDW-1-MN shown) Decal-Install on upper stainless steel panel. -
Page 7: Operation
6. At the end of the day or shift, turn unit off and allow to cool down. Clean as required. Temperature Gauge Power Switch Temperature Control Figure 6. Control Panel FDW-1-MN Temperature Gauge Power Switch Figure 7. Control Panel FST-1-MN OPERATION... -
Page 8: Maintenance
Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure... -
Page 9: Hatco Limited Warranty
Hatco reserves the right to accept or reject any such claim in whole or in part. Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer’s sole expense. - Page 10 NOTES Form No. MNM-0702...
- Page 11 NOTES Form No. MNM-0702...
-
Page 12: Authorized Parts Distributors
Alpro Service Co. IOWA Brooklyn Electric Motor Service Co. Davenport 319-323-1823 Parts & Service Fax (800) 690-2966 Printed in U.S.A. July 2002 HATCO AUTHORIZED PARTS DISTRIBUTORS NEW YORK (continued) Appliance Installation Buffalo Northern Parts Dist. Plattsburgh J. B. Brady, Inc. 225-272-6620...
Need help?
Do you have a question about the MACHO NACHO FDW-1-MN Series and is the answer not in the manual?
Questions and answers