Table of Contents
Advertisement
Jumper Settings
X
Mini PCIe Signal Select
The signal of Mini PCIe can be switched between SATA (default) or PCIe via JP23. When SATA
bus is selected, please further decide whether it is directed to the Mini PCIe connector (mSATA
signal) or the 7-pin SATA connector, SATA 3 (R5).
3
2
1
„ 1-2 On: SATA bus (default)
User's Manual | CS650
JP23
3
2
1
„ 2-3 On: PCIe bus
Jumper Settings
X
mSATA (Mini PCIe connector) / 7-pin SATA (SATA 3) Switch
The Mini PCIe bus is shared by a SATA bus and a PCIe bus. When set to SATA bus via JP23 as
previously instructed, this SATA bus can further be directed to either the 7-pin SATA connector,
SATA3 (R5) or the Mini PCIe connector (mSATA signal) via JP21.
1
2
3
„ 1-2 On: 7-pin SATA connector (SATA4)
Chapter 2
HARDWARE INSTALLATION
1
JP21
1
2
3
„ 2-3 On: mSATA via Mini PCIe (default)
17
Advertisement
Table of Contents
