Table of Contents
Advertisement
Internal I/O Connectors
X
Front Audio
„ Front Audio
2
10
1
9
The Front Audio internal connector allows you to connect to the second line-out and mic-in
jacks that are at the front panel of your system.
„ Front Audio Pin Assignment
Pin Assignment
1
Mic-L
3
Mic-R
5
Line-Out-R
7
GND
9
Line-Out-L
User's Manual | CS650
Pin Assignment
2
GND
4
N.C.
6
Mic-JD (sense)
8
KEY
10
Line-JD (sense)
Internal I/O Connectors
X
SATA (Serial ATA)
The Serial ATA (SATA) connectors are used to connect the Serial ATA device. SATA 3.0 is sup-
ported by the five SATA ports and provides data rate up to 6Gb/s. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Jumper Setting
A SATA bus is either terminated at SATA3 (R5) or Mini PCIe (mSATA), and is configured via
JP23 and JP21 as previously instructed in this chapter.
„ SATA Pin Assignment
GND
TX+
GND
RX+
GND
Note:
The SATA bus of SATA3 (R5) is shared with Mini PCIe (mSATA), and will be inac-
tive when the SATA bus is directed to Mini PCIe (mSATA).
Chapter 2
HARDWARE INSTALLATION
1
1
SATA0
SATA1
(R2)
(R3)
1
1
SATA2
SATA3
(R4)
(R5)
1
TX-
RX-
7
25
Advertisement
Table of Contents
