Jumper Settings; Clear Cmos Data; Mini Pcie Signal Select (For Cs330-Q370 Only) - DFI CS330 User Manual

Jumper Settings

Clear CMOS Data

If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP5 pins 2 and 3 to On. Wait for a few seconds and set JP5 back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Chapter 2 Hardware Installation
Chapter 2
1 2 3
JP5
1-2 On:
Normal (default)
1 2 3
2-3 On:
Clear CMOS Data
15

Mini PCIe Signal Select (for CS330-Q370 only)

JP9 is used to select the Mini PCIe (full-size) signal: Mini PCIe (default) or mSATA.
1 2 3
1-2 On:
Mini PCIe
(default)
JP9
1 2 3
2-3 On:
mSATA
www.dfi.com